Pulp and paper equipments
This category shows different examples of equipment designed and manufactured for the pulp and paper indusries. These examples of product have been selected to show our presence in all departments of paper mill.
Whether the arrival of chips to the instruments used to verify the quality of the rolls, Systech is able to realize all projects related to this industry.
All devices manufactured at Systech Industrie inc. are tailored to specific customer needs. It is therefore possible to modify in part or in whole apparatus represented on this site.
Reel
Systech designs, manufactures and modifies reels to adapt to existing equipments.
»» Full description
Rebuilt winder
Systech can support, modification,
improvement and increased performances from your winder and rewinder.
»» Full description
Out-of-round measurment device
This device is used to check the deformation level of the paper roll after handling. It is light and does not take much space because of its used
»» Full description
Diameter measurment device
this device is installed directly in the finishing line to check the diameter of the paper roll before the wrapping operation.
»» Full description
Tail strainer
This device is made up of three parts:The sheet treader is a powered roller that enters the sheet point automatically in the winder by pressing it against the
»» Full description
Corrugated cartonboard folder machine (fanfold)
Commonly named Fanfold machine, this machine create a fold every 4 feet, which can fold a sheet as long as you need.
»» Full description
Printos
Device that supports and displace the marking instruments inkjet.
»» Full description
Handling equipment
Systech has developed and implemented various trolleys for large rollers or where a long pièce has to move in tight spaces requiring a mechanism that plays on the turning radius of the
»» Full description
Core chuck
Designes to replace shaft mechanism, this device permits considerable time saving in addition to sparing workers potential injuries due to the removla of the shaft that holds the
»» Full description
Pull roll
This equipment is used to adjust and maintain a tension on the sheet of paperboard just before the cutting rollers.
»» Full description
Conveyor
Whether a belt conveyor, slates conveyors, roller conveyors, or vibratory conveyor, Systech makes the design and manufacture in accordance with customer specifications.
»» Full description
Turntable
This rotary table is used to rotate the position of a roll. This rotary table is a endow Lag type device cradle that slowed the movement of the
»» Full description
Reel spool starter
This reel spool stater is used to start the spool to reach the sheet speed.
»» Full description
Tail cutter (wet end)
this device is used to cut a narrow band which permits gradual insertion of the sheet into the press.
»» Full description
Tail Cutter (dry end)
This compact devise is used to cut a narrow band which permits gradual insertion of the sheet in the calender.
You don't need an experienced operator for this process.
»» Full description
Core Room
Systech design, build and if you need modify partly or wholly your core room.
A core room includes:
the feed conveyor
the automatique,semi-automatic or manual core saw for core of diameter between
»» Full description
Rolls press for heating plates
Device designed to glue the paperboard caps on the paper rolls by press operation.
»» Full description
Chip sampling system
This equipment is used to take a chip sample directely into the trailler.
»» Full description
Trim squirt adjusting device
Device comprising two jets of water which are ajustable across the paper or board machine and which divide the wet web on the wire lengthwise so that the
»» Full description
Solid particle conveyor
Conveyor used to make the ongoing maintenance of under floor chanels.A conveyor scrapers removes solid particles that clog the mesh surface of the conveyor to permit only the
»» Full description
Automatic core distributor
If the configuration of winder allows, this device is used to insert fiberboard cores while the rolls of paper are not yet withdrawn
»» Full description
Illuminating table for visual inspection
Table that allows to observe the defaults of a translucent product as a sheet. This table project a uniform light above and/or bellow the product to be inspected.
»» Full description
Trim collector
installed on each side of the cutting table, this mechanism serves to guide the trim outside of the winder.
»» Full description
Winder sheet cutter
The cutting operation is made during the operation of rolls ejection. As we eliminate the manual cutting operation, the cycle time is considerably reduced.
»» Full description
Roll shock absorber
mechanism used to reduce the speed of the roll. With this product, we extend the maintenance on the equipements.
»» Full description
Spreader bar adjuster
This mecanism change the curve of the bar to separate the roll on the winder. We can use the preset program or adjust it manually.
»» Full description
Rolls stoppers and kickers
Those equipment are used to decelerate, move and stop the rolls. They can be designed to be under or on the operation floor.
»» Full description
Skiver
The Systech skiver has been designed to create a roll with 2 or more smaller rolls.
We skive one side of each roll. The skived sides are glued together,
»» Full description
Powerful cleaner
This vacuum cleaner has been designed to collect the dust and particles at the places where it is difficult to reach, for exemple, the carbon dust accumulated in
»» Full description
Unwinding stand
this device makes unwinding of ejected reels possible without using cutting blades, thus eliminating the risk of injuries.
The core can recovered without being damaged.
»» Full description
Unreeling stand
This device is used to start the unwinding process of paper toward the pulper,then regulates the speed by a braking process.
»» Full description